User manual

-11-
 While the Home Screen is standard style, you
can change the responsible shortcuts for
【Navigation Key】under standby mode.
11.3.4 Auto power on/off
You can set the phone to switch on/off at a
scheduled time.
11.3.5 Power management
Display the battery capacity.
11.3.6 Restore factory settings
Reset all parameter values into default status.
Please enter the privacy preserving password
(Initial password is 1234) to resume factory
setting.
11.4 Display settings
11.4.1 Wallpaper settings
Select the default or other pictures as the
wallpaper of the phone.
11.4.2 Idle screen style
”Standard style” and “Smart style” are available.
11.4.3 Contrast
Press 【Left /Right Key】to adjust the contrast.
11.4.4 Backlight
Select the desired backlight time.
11.4.5 Keypad backlight time
Select the desired keypad light time.
11.4.6 Animation effect
You can select the preset animation or others as
the power on/off animation for your phone.
11.5 Security settings
In order to secure the information, you can set
PIN code, PIN2 code and power-on password.
11.5.1 PIN
PIN code is the personal identification number for
SIM card. If never be modified, the initial
password set by network operator should be
1234 or 0000. If activated the power-on PIN code,
then you have to input the PIN password each
time you switch the phone on. You can modify
the PIN code to prevent your SIM card being
used by others.
Caution：
If you input your PIN code incorrectly three
times in succession, the SIM card will be
locked automatically, and prompting to enter
PUK code to unlock it. Therefore, please do
remember the PIN code, if you modify it.
PUK code (PUK1) is made up by 8 digits,
unmodifiable. When the phone is locked by PIN