Owner's Guide 1

14
Chapter 3 Brief Introduction
3.1 Keypad introduction
3.1.1basic keys
 OK key
Generally use ok key to confirm after select. Under the
standby mode, press the key into the main menu interface.
 Dial key
Receive and dial a calling; press the key to take out the
calling record under standby state.
 Ending key
Ending or rejecting a call.
Press and hold more than two seconds to turn on or off the
phone in other condition.Press it will come back the standby
mode.
 0-9 ：input number
 Navigation key: press left, right, up, down key to the
appointed function
 Left soft key: confirm
 Right soft key: return
 Shortcut key: press this key to appointed function
3.2Phone function
When the telecom’s logo appears on the screen, you can
make calls with your phone. The signal indicator on the top left
corner of the screen shows the strength of the signal (the signal
is in the best situation when there are six lines). The reception is
liable to the obstacles, so move around in a small area will be
helpful for the calling.
3.2.1Make a call
 Domestic calls:
Use the numerical keys or click the phone icon on the
bottom of the screen to input the phone number, and then press
the calling key to make a call. The right soft key is used to
delete the last digit of the number. Pressing and holding it for a