Operation Manual

Thermostatic radiator valve | 19
EN
• Log in to the local web interface
(HTML interface) of Adam HA.
Make sure that your device is
connected to the same network as to
which Adam is connected:
» open the HTML interface in the app
» or go to connect.plugwise.net and
log in with the ID of Adam.
• Go via the menu to Setup to add an
appliance.
• Use the option to add a new appliance
(the + sign in the right bottom corner).
• Press the push button briey on the
thermostatic radiator valve when
instructed, so the radiator valve
becomes visible in the network.
» The LED is blinking green slowly if
the radiator valve is searching for a
new network to join.
» The LED is solid green if the radiator
valve is (already) added to the
network.
3. Add to the Zigbee network
Not successful in adding the
thermostatic radiator valve to the
network? First remove the radiator
valve from the network, see also page
20, and try again.
Do you want to add the thermostatic
radiator valve to another system?
Please consult the manual of the
Zigbee gateway you want the
thermostatic radiator valve to
connect to.
push button
Tom
push button
Floor