Operation Manual

13
networktoprocessthenewlocaonoftheSwitch.
Ì AachtheSwitchtothewallusingthedouble-sidedadhesivestrips
orthesuppliedscrews.
Ì Ifyoudecidetousescrewsinahardwall,youshoulddrill5-mm
holesandinsertplugs.
Ì OncetheposionoftheSwitchhasbeennallydetermined,the
surroundcanbeed.
Thesurroundcanonlyberemovedbyinserngascrewdriverinthe
openingsattherearbetweenthebackplateandthesurround.This
ensures that the Switch cannot be removed or opened. In a home
environment,youcandecidenottoghtenthescrewstooghtly,so
thattheSwitchcansllbeunscrewed.
4. Use
Switching appliances
TheappliancesthatyouhaveconnectedtotheSwitchusingSource,will
beswitchedowhenyoupressthelowerpartoftherockermarked
withtheandswitchedonwhenyoupushthepartmarkedwiththe
|.
The Switch contacts one of the Circles in your network. This Circle
forwardsswitchingcommandstotheotherCircles.IfaCircleispartof
theSwitch’sgroup,itperformstheswitchingcommand.IftheCirclethat
theSwitchtriestocontactisunavailable,aconneconwillbe made
withanotherCircle.Thiscantakeseveralseconds.
Thecomputerdoesnotneedtobeswitchedontobeabletousethe
Switch.
IfthelighngisoperatedusingtheSwitch,therecommendaonistono
longerusetheexisngswitches.Youcouldconsiderlenganelectrician
removetheexisngswitchesandinstallaSwitchatthelocaonthat
becomesavailable.
Assigning other appliances to the Switch
Sourcecanbeusedtoassigntheappliancesthatmustbeoperatedwith
theSwitch.
Ì GotoSengs,Groups.
Ì Onthele,searchforthegroupinwhichtheSwitchislocated.
Ì Dragotherappliancestothisgroupordragthecurrentappliances
backtothetopright-handpartofthescreen.
Ì RemovingaSwitch
Ì IftheSwitchwill(temporarily)nolongerbeused,itcanberemoved
fromthePlugwisenetwork.
Ì StartSourceandgotoSengs,Appliances.
Ì Thelistof‘Nonassignedmodules’isdisplayedtotherightofthe
screen.RightclicktheSwitchandthenclick‘Delete’.