Operation Manual
12
Plugwise network is operang correctly (refer to ‘Before you start’). If the
Sck and the other modules are available in Source and the Switch is sll
not shown as being online, follow the instrucons to delete the network
sengs under ‘Delete network sengs’, see: ‘Advanced use’.
Ì Click‘Next’andthen‘Finish’.
TheSwitchisnowconnectedtoyournetwork.
2. Choosing the appliances to
switch
The Switch can be assigned to a single appliance or to mulple
appliances.Thisisdonevia‘Groups’inthe Sourcesengs menu.If
youhavetheversionwithadoublerocker,youcanassigneachsideto
dierentgroups.
Ì InSourcegotoSengs,Groups.
Ì Clickthe+(‘CreateGroup’)buon.
Ì Enterarecognisablenameforthe group,forinstance‘Switchfor
groundoor’.
Ì PresstheSwitchrockeronce(ifyouhavethedoublerockerversion,
pressbothrockers).Therockerswitchesareaddedtothelistofrocker
switchestoassigninthelowerhalfofthescreen.
Ì Dragtherockerswitchtothedesiredgroup.Ifyouareusingthe
singlerockerversion,selectthemodulewith‘Le’attheendofthe
name.
Ì Use the mouse to drag the appliances to be switched from the
‘Appliances’listtothenewlycreatedgroup.
Ì Important:click‘SendGroups’tosendthesengstoyourPlugwise
network.
Ì Check whether the appliances in the group respond when the
rockersoftheSwitcharepressed.
Ì TakeoneofthelabelsthatareonthebackoftheSwitchandaach
ittotheinstallaonlistofyourPlugwisenetwork.Indicateonthelistthe
groupthatisassignedtotheSwitchandwheretheSwitchwillbehung.
ASwitchcanonlybeassignedtoasinglegroup.However,itispossible
toassignaappliancetomulplegroups.
3. Attaching the Switch to the wall
TheSwitchcanbeaachedtothewallintwoways:usingtheadhesive
stripsorusingscrews.
Ì TaketheSwitchtothelocaonwhereitmustbelocated.Thismust
bewithin5to10metresofaCircle.
Ì Check whether the appliances that are assigned to the Switch
respondtobeingswitchedonando.Itcantakeseveralminutesforthe