Installation Instructions

14 | Stretch 3
Behaviour of
the lights
The Stretch has 3 LEDs. In the table below
the most important behaviour of the lights
of the Stretch is explained.
LED Colour Pattern Description
STATUS Green Blink slowly The Stretch is starting up. Wait until the Stretch is ready.
When in access point mode, the LEDs STATUS and WLAN
are blinking slowly.
STATUS Green Blink slowly,
then on
The Stretch is starting up. Wait until the Stretch is ready:
• when connected via a network cable, the LEDs
STATUS and LAN are turned on.
• when connected to WiFi, the LEDs STATUS and
WLAN are turned on.
WLAN Green Blinking Communication with the WiFi network.
WLAN Green Blink slowly Cannot connect to the WiFi network. Has something
been changed in the router settings? Follow the steps
below “having trouble using WiFi?”.
LAN Green Blinking Communication with the network via the network cable.