Installation Instructions

11 | Stretch 3
EN
Installation the Stretch with as many Circles as
possible.
The Circle+ (the Circle that contains a
grey back) should always be placed
within a 5-meter range of the Stretch.
The Circle+ behaves like a ‘router’ in
the network. The Circle+ is always
reachable for other Circles.
All Circles should be positioned at a
maximum distance of 5 to 10 meters of
at least one other Circle or the Stretch.
Concrete walls and ceilings will reduce
the range of the network.
For a highly responsive network,
install as many Circles as possible.
3. Connect to the network
Connect the adapter cable to the
adapter and the Stretch and plug the
adapter into the wall socket. Wait until
the Stretch has booted up: the upper
light (WLAN) and the light in the
middle (STATUS) of the Stretch are
blinking slowly.
WiFi via WPS?
WiFi via WPS is only supported via a
special WPS button on the router.
Press the black button on the Stretch
for 2 seconds. Wait until the upper
(WLAN) light is blinking quickly and
The installation can be described in 3 steps:
1. Place the Stick in the Stretch.
2. Place the Stretch.
3. Connect the Stretch to the network.
4. Validate the network connection.
1. Place the Stick in the Stretch
Remove the cover of the back of the
Stretch and place the Stick in the
Stretch.
Place the Stretch centrally located in
the house, for example near the
stairwell at the rst oor.
Make sure that there is direct contact of
Circle+ Circle+
Circle
2. Place the Stretch