Scan Presence detection Manual 200.106.
Scan Manual Thank you for buying this extension to your Plugwise system. The Scan enables you to detect people’s presence by means of an IR sensor and to switch appliances and lighting on and off when people are or are not present in a room. The wireless Scan is battery operated and communicates measurement data by means of the Plugwise ZigBee protocol. This does not require the computer to be left on.
1. Adding the Scan to your Plugwise network ÌÌ Adding the Scan to your Plugwise network. high sensitivity medium sensitivity When you are asked to select a network, select the network to which the Scan must be added. 2.40 m ÌÌ Fill in the ID of the Scan. This ID is indicated on the stickers that are attached to the back. ÌÌ Click the button with the green arrow: Next, insert the AA battery in the Scan, making note of the + and – marks.
3. Use Removing Scan Communication in the network The Scan contacts one of the Circles in your network. This Circle transmits the measurement data to the other Circles. If the Circle that the Scan tries to contact is unavailable, a connection will be made with another Circle. This can take several seconds. The computer does not need to be switched on to be able to use the Scan.
. Environment 7. Support and contact Old electrical and electronic devices often contain valuable materials. Therefore, never dispose of discarded devices as normal household rubbish. Hand the device in to a local authority collection point for electrical and electronic devices. Never throw batteries away with the household rubbish; instead hand them in at the special collection points. A detailed Plugwise Source manual is displayed if you click the ‘Help’ button at the bottom of the screen.
