Installation Instructions
10 | Plug
Controls
Top button
The push button on top can be used for
switching the Plug on and off.
Side button
The button on the side of the Plug is used
for various purposes. The LED in the push
button on top shows you feedback.
An overview of the different LED
behaviours is provided in the table on the
next page of this manual.
The LED will ash red every second while
the button is pressed. This helps you
counting the seconds.
Removing the Plug from the
network
Press and hold the button on the side
for 5 seconds and release.
After you have released the button, the
LED will burn solid red for 5 seconds: the
Plug has left the network.
Button sequence not recognized
When the Plug does not understand the
button pattern, the LED will ash red for
0,5 seconds.
Top button
Side button
•