Operation Manual
20 | Zone thermostat
LED behavior
The LED is located on the backside above
the pushbutton.
Batteries vs. USB adapter
If Lisa is congured with batteries it
behaves like an “end device” (SED).
The LED indications described as “solid”
will now blink shortly every second.
Colour Pattern Description
Green ZR: 5 seconds Lisa has successfully joined the network or has
already joined the network.
SED: 5x quickly blinking
(on: 1 second/second)
Green Slowly blinking Lisa is joining a network (in progress).
Red 5 seconds Joining the network has failed or the network
settings have been erased.
Red Quickly blinking (3 seconds) The batteries are almost empty.
Red 1 Blink (0,5 second) Lisa does not understand the pattern that has
been pressed.
Red Quickly blinking
(on: 0,1 second/second)
The button is pressed.
Need support
plugwise.com/support