Installation Instructions

Adam | 23
EN
LED Colour Pattern Description
Green
Green
Blinks slowly
Blinks slowly
Adam is in access point mode
Green
Green
On
Blinks slowly
In acces point mode and connected to a device
Green Irregular Communication with the wi network
Green On Adam is on
Green Irregular Communication with the LAN network
4. Use Adam
settings, insight in your heating behaviour
using graphs, set up zones and or edit the
gateway setings.
• Go to connect.plugwise.net.
• Login with your ID. Enter username
smile and use the ID as password. The
web interface of Adam will open.
App
With the app you can easily set the
temperature, also when you are not at
home.
Use Adam via the local web interface
(HTML interface) or with the app.
Make sure that in the following
situations your device is connected to
the same network as to which Adam is
connected:
» When adding Adam to the app.
» When using Adam via the web
interface.
Local web interface
In the local web interface you will nd all
the functionalities and settings that are
available for Adam, e.g. temperature
The LED behaviour