SDS

Material Safety Data Sheet
Report No.: RSZBHST17070383-1
Date of Issue: Jul 28 2017
Rechargeable Li-Polymer Battery
EU Page 3 / 7
6. ACCIDENTAL RELEASE MEASURES
Accidental:
If the battery breakage and electrolyte leakage, evacuate personnel
until the smoke cleared.
Wipe with a cloth and placed in steel drums into the bag inside.
If the battery is hot, away from the scene firstly, cool the battery, so that
the steam dissipated. Adequate ventilation.
Avoid skin or eye contact steam.
Waste treatment:
The battery Should discharge completely, the waste batteries will be
turned over in the relevant sector, and all waste must refer to the United
Nations, national, local regulations for disposal. Reference to national
or federal Environmental Protection Agency EPA.
7. HANDLING AND STORAGE
Prohibit mechanical or electrical damage battery.
Stored in a dry, cool and ventilated environment, to avoid temperature changes or high
temperature.
Keep away from heat, avoid prolonged sun exposure.
Against short circuit, overcharge, forced discharge, or in a fire.
Battery disassembly, crush, fire or high temperatures can cause fire or explosion, prohibit
short-circuit or error operation.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory protection:
If the battery leaks, the need for full ventilation.
Hand Protection:
Under normal use, do not.
Personal Protection:
Under normal use, do not.
Other protection:
Under normal use, do not.
If the battery leaks, must wear the following protection products.