Phau Ntawv Qhia

1 972-535-0926 | pltsolutions.com | ver 031023
COLOR SELECTABLE ULTRA-THIN LED DOWNLIGHT
WARNING, CAUTION, SAFETY AND INSTALLATION INSTRUCTIONS
WARNING
Installation, service, and maintenance of luminaries should be performed by a qualified licensed electrician.
CAUTION
Confirm the applicable power supply.
Preliminarily estimate the required quantity of LED fixtures. Divide the power rating (0.9) by the fixture
wattage and multiply by the number of fixtures to figure out the total power and design power plan.
Contact the manufacturer if the wire or cable is damaged. Do not attempt to repair it on your own.
Installation Instructions
1. Turn off the main power circuit.
Using the template provided, cut a hole in the
desired position of the ceiling.
2. Slide the dip switch to the desired color
temperature at the driver box.
3. Remove the knockout(s) on the side(s) of the
junction box.
Run the electrical wire from the power source
through the knockout(s).
4. Connect the supply wires to the driver’s wires
using the wire nuts (provided).
Push the wires inside the junction box and close
the box.

Summary of content (4 pages)