Instruction Manual

OUTDOOR POWER STAKE W/ REMOTE & TIMER
SAFETY AND INSTALLATION INSTRUCTIONS
6
972-535-0926 | pltsolutions.com | ver 020122
Manual Operation
• Press the timer control button (E) to turn on the receiver. The Power indicator (D) will be illuminated.
• Press the timer control button (E) until the Sensor indicator (D) is illuminated to activate the dusk-to-dawn
setting.
This setting will turn on the receiver when sensing dusk and turn off the receiver at dawn.
• Press the timer control button (E) until the Sensor indicator and the 2hr, 4hr, 6hr or 8hr indicator (D) are
illuminated. This setting will turn on the receiver for a specified time after sensing dusk. After that
specified time, the receiver will turn off.
• Press the timer control button (E) until the Timer indicator and the 2hr, 4hr, 6hr or 8hr indicator (D) are
illuminated. The receiver will turn on immediately, then off after the specified time. This setting will repeat
daily.
Operation Tips
• When set to ON, the receiver will provide continual power to all connected devices until the receiver is switched
to OFF or switched to any of the other operating modes.
• In the sensor ( ) mode, temporary light sources like headlights, porch lights, streetlights and other
external light sources will not interfere with the photocell function unless the external light source is on for
more than 15 minutes. In that case, the receiver will shut off until darkness is restored. This function has
been implemented to avoid flickering, or constant on/off for all connected devices.
• Once sensor ( ) mode activates at dusk in conjunction with the 2hr, 4hr, 6hr, or 8hr mode, the
program cycle will complete before the timer resets. Headlights, porch lights, streetlights and other
external light sources will not interfere with the active program.