Instruction Manual

OUTDOOR POWER STAKE W/ REMOTE & TIMER
SAFETY AND INSTALLATION INSTRUCTIONS
5
972-535-0926 | pltsolutions.com | ver 020122
Operating Instructions
• The power stake can be operated via the included remote control from up to 100 feet or manually via the
buttons on the connector body (receiver).
Remote Control Operation
• Press the ON or OFF button to turn the receiver power on or off respectively.
• Press the Timer button plus the 2Hr, 4Hr, 6Hr or 8Hr button to turn on the receiver for a specified time.
After that specified time, the receiver will turn off. This setting will be repeated daily.
• Press the Sensor button ( ) for dusk-to-dawn operation. This setting will turn on the receiver when
sensing dusk and turn off the receiver at dawn.
• Press the Sensor button plus the 2Hr, 4Hr, 6Hr or 8Hr button to turn on the receiver for a specified time
after sensing dusk. After that specified time, the receiver will turn off.
Remote Control Battery Information
• The RF (radio frequency) transmitter is powered by one 3V (CR2032) lithium battery (included with remote
control).
• To replace the battery, remove the battery compartment cover away from the remote.
• Remove the old battery and place a new 3V (CR2032) lithium battery into the battery compartment.
• Install the new battery observing the positive (+) side up as indicated inside the battery compartment.
• Replace the battery compartment cover.
• Dispose or recycle spent/discharged batteries in compliance with all applicable laws. For detailed information,
contact your local solid waste authority.