Instruction Manual
Table Of Contents
OUTDOOR POWER STAKE W/ REMOTE & TIMER
SAFETY AND INSTALLATION INSTRUCTIONS
4
972-535-0926 | pltsolutions.com | ver 020122
Installation Instructions
•
Connect the two pieces of the yard stake together by screwing Lower Stake (C) into Upper Stake (B).
•
Attach the assembled stake to the Connector Body (A) by screwing the top of Upper Stake (B) into the
base of the Connector Body (A).
•
Be sure to firmly tighten the assembled stake to the Connector Body (A) before installing into the ground.
•
The connector body (A) shall be maintained at minimum of 6 inches above the ground.
•
Plug the power cord into a GFCI receptacle. The power cord is a 6ft 14/3 SJTW cord.