Instruction Manual

【 How to use the PLEN Cube 】
1. Voice commands
Basic functionalities of the PLEN Cube can be controlled through the use of speaking
the trigger word followed by a command word.
Begin by speaking the trigger word “ Hirakegoma ” (hee-rah-kay-goh-mah), meaning
“open sesame” in Japanese. If the PLEN Cube has successfully heard and understood
the trigger word, it will turn to face the user and a “pong” sound will be heard.
The user can then voice one of the following commands in a clear, slow voice.
<This will definitely need an english translation >
If no command is given, or the command is not recognized by the PLEN Cube, the
device will gesture misunderstanding and no commands will be carried out.
The trigger word must be voiced before giving any command word. A command word
will not be carried out if the trigger word is not first clearly stated, or if the command is
not given to the PLEN Cube within the default listening period of 7 seconds.
2. Web Application
It is also possible to control the PLEN Cube using a smart device or PC that is
connected to the same network as the PLEN Cube.
A list of the voice control commands can be found in the “Settings” tab in the menu on
the web application and then select “Voice Commands.”
9