Instruction Manual

CE statements:
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Do not use the device in the environment at too high or too low temperature,
never expose the device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0℃-40℃.
When charging, please place the device in an environment that has a normal room
temperature and good ventilation. It is recommended to charge the device in an environment
with a temperature that ranges from 0℃~40℃. Please ensure to use only the charger offered
by the manufacturer. Using unauthorized charger may cause danger and violate the authorization
of the phone and the guarantee article.
The charger type is ATS018T-W050V, output voltage/current is 5V DC/3A. The plug considered as disconnect
device of adapter.
The SAR limit of Europe is 2.0 W/kg. Device types PLEN Cube PC020B has also been tested against this SAR
limit. The highest SAR value reported under this standard during product certification for use on the body is
0.038 W/kg. This device was tested for typical body-worn operations kept 0.5cm from the body. To maintain
compliance with RF exposure requirements, use accessories that maintain a 0.5cm separation distance between
the user's body . The use of belt clips, holsters and similar accessories should not contain metallic components
in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure
requirements, and should be avoided.
Frequency range
Operating Frequency Range, Max EIRP
2.4GHz WiFi: 2412MHz ~ 2472MHz, 16.76dBm
Bluetooth: 2402MHz ~ 2480MHz, 7.21dBm
Manufacturer
Manufacturer: PLEN Robotics Inc.
Address: Crepis21 303,4-6-3,Toyosaki,Kita-Ku,Osaka-shi,Osaka,Japan
20