Instruction Manual

【 Music Streaming Services 】
The PLEN Cube has the ability to connect to various internet streaming platforms
(KKBOX, Tidal, Napster). However, this functionality is not currently available. Music
services will be offered beginning in the year 2020 .
【 Infrared (IR) Remote Control Instructions 】
The infrared output (sending) LEDs are located on the left, right, and back faces of the
PLEN Cube, while the input (IR signal receiver) is located on the right face with one of the
output LEDs. The receiver is capable of recording IR inputs from other device signals (ie: IR
remote controls for televisions, air conditioners, IR controlled lights, etc…).
※ As of October 2019, the voice commands “TV On” / “TV Off” / “Light On” / “Light off” have been implemented
and are available.
<Recording new IR signals>
1. The open hold on the right side of the PLEN Cube’s top layer is where the IR signal
receiver is located.
2. In the PLEN Cube web application, open the “Infrared” from the menu panel, choose a
command to record a signal from the drop down menu, and select “Record Signal.”
The PLEN Cube will immediately start recording any infrared signal entering the
receiver sensor. Push the desired button on the remote control to record that IR signal
to the PLEN Cube while pointing the sending LED of the controller at the hole on the
right side of the PLEN Cube (with the IR receiver).
12