Use and Care Manual

5
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 1 minute
CAUTION
Some parts may contain sharp edges. Wear protective gloves when handling glass rocks. Read
and follow all safety statements, warnings, assembly instructions and use and care instructions
before attempting to assemble and use. Keep glass rocks away from children.
ASSEMBLY INSTRUCTIONS
1. Pour one pack of the glass rocks (A) over the burner
of a gas powered re table. Do not cover ignition
screen with glass rocks (A). Use a glove when
handling glass rocks.
1
A
P
The burner of the rebowl must be covered by glass rocks
completely. Otherwise the ame may be extinguished occasionally.
See the CORRECT and INCORRECT images for reference.
CORRECT
INCORRECT
Screen
Do not place glass
rocks on screen.
Keep screen clear.
A
CAUTION
Use a glove when handling glass rocks.
1. Do not light or use gas unit if glass rocks are wet. Make sure glass rocks are completely dry before lighting as intense heat could
cause the rock to crack.
2. Glass rocks could hit a person’s face or eyes during the initial startup of a gas appliance. Keep away from the appliance for the
rst 20 minutes after lighting.
WARNING
DO NOT COVER THE IGNITION SCREEN when
placing the glass rocks into the re bowl. Always
keep Ignition Screen visible. This screen must be
clear and free of obstructions at all times to insure
proper operation.