Use and Care Manual

5
Screen
Do not place glass
rocks on screen.
Keep screen clear.
Do not place glass
rocks on screen.
Keep screen clear.
Screen
ASSEMBLY INSTRUCTIONS
Models
OFG418TA/OFG444T/OFG900T/OFG901T
OFG419T/OFG321S
Only 14.33 lbs/6.5 kg glass rocks are
approved for safe use with these re pits.
Only 7.28 lbs/3.3 kg glass rocks are
approved for safe use with these re pits.
Models
OFG466TA/OFG467T
1. Carefully pour one pack of the glass rocks in the re bowl, per the examples below. Do not cover
the ignition screen with glass rocks. Wear protective gloves when handling glass rocks.
CORRECT INCORRECT
Do not place glass
rocks on screen.
Keep screen clear.
Screen
Only 7.72 lbs/3.5 kg glass rocks are
approved for safe use with these re pits.
Models
OFG012T/OFG824T/OFG007TF/OFG125T
CORRECT INCORRECT
CAUTION
Wear protective gloves when handling glass rocks.
1. Do not light or use gas unit if glass rocks are wet. Make sure glass rocks are completely dry before lighting as intense heat could
cause the rock to crack.
2. Glass rocks could hit a person’s face or eyes during the initial startup of a gas appliance. Keep away from the appliance for the
rst 20 minutes after lighting.
3. Do not add additional rocks to the re bowl. Follow the instructions on the manual of the specic product.
4. Do not mix glass rocks with lava rocks.
5. Do not use two di󰀨erent sized glass rocks at the same time.
WARNING
DO NOT COVER THE IGNITION SCREEN when placing the glass rocks into the re bowl. Always keep Ignition Screen visible. This
screen must be clear and free of obstructions at all times to insure proper operation.
CORRECT
INCORRECT
These glass rocks can be used with other gas re pits. Before use, carefully check the instructions of
how to replace the glass rocks in the manual of the specic product; or contact your re pit supplier or
GHP Group’s customer service.