Installation Guide
8
INSTALLATION INSTRUCTIONS
Simply place your electric log set in the desired location, observing the clearances and notes in this
rated for a minimum of 1,875 watts if necessary.
Note: For best effect, install unit in an area out of direct sunlight and about 3-3/8” (86mm) away from
a wall.
Your new electric log set with heater can be installed in several ways:
Unpacking:
Remove the unit from the carton and make sure that all parts are present and carefully check for
damage. If any part is missing or damaged, do not attempt to assemble or use the product. Contact
Customer Service for help at
Front: 36” (915mm) Rear: 3/4” (19mm) Sides: 4-1/8” (105mm)
Top:
LI-24 - 3/8” (10mm)
Model #LI-24
Clearances to Combustibles
Warning: Do not install unit on carpeting, rugs, beds, blankets, pillows etc. Keep
combustible materials such as furniture, bedding, papers, clothes and curtains at least










