Instructions / Assembly
4
C
ASSEMBLY INSTRUCTIONS
1. Remove Blower Top Access Panel
and Bottom Panel.
FF
2. Mount Blower (B) onto bottom of
Fireplace Top using 4 screws (F).
3. Pre-thread the Power Cord
Screws. Attach Power Cord (A) to
Blower Access Panel.
4. Attach Temperature Sensor (C) to
the Combustion Top using 2 sheet
metal screws.
1
2
3
AccessPanel
Screws
PowerCord
AccessPanel
WARNING: This appliance is equipped with a three-prong (grounding) plug
for your protection against shock hazard and must be plugged directly into a
properly grounded three-prong receptacle.
Firebox must be disconnected from gas supply and removed from mantel
before installing fan accessory. Contact a qualied service person to do this.
BLOWER INSTALLATION (OPTIONAL)
4
Sheet
Metal
Screws
Senser
Bracket
Combustion Top
Mounting Holes
Regulator