Technical Specifications

#14 x 1¹|₄"
pan head screws (8)
³|₈" x ³|₄"
hex bolts (10)
#8 x 2¹|₂" deck screw (1)
¹|₄" washers (6)
³|₈" washers (20)
³|₈" lock
nuts (10)
¹|₄" lock
nuts (6)
¹|₄" x 2" machine screw (2)
⁵|₈" rubber
washers (2)
(1) Water Slide (2 pieces)
(1) Water Cannon
(4) Water Slide Stakes
All Mounting Hardware
Complete Illustrated Instructions
CONTENTS TOOLS REQUIRED
HARDWARE INCLUDED (shown actual size)
SLIDE ASSEMBLY
Drill
¹⁄₈" & ¹⁄₄" Drill Bits
Saw
Tape Measure
Screwdriver
(regular or phillips)
Hammer
Shovel
Adjustable
Wrench
⁷⁄₁₆" Wrench
⁹⁄₁₆" Wrench
Water Slide Kit Contains:
U-strap
(2)
1. On a flat work surface lay the two pieces together, upside down as shown.
2. Secure the two pieces together with ten ³⁄₈" hex bolts, ³⁄₈" washers
and ³⁄₈" lock nuts as shown. (Fig. 1)
Fig. 1
1
3
/
4
"
Note: For stake angle cut, measure
1³⁄₄" from straight cut. Draw a line from
measurement to center of straight cut.
1
3
/
4
"
18"
4 Required
2" x 4" Stake
FOR PERMANENT
INSTALLATION
2