Technical Specifications

(2) Molded Sides
(4) Welded-Link Chains
(
2) Swing Hangers
Weather-Resistant
Hardware
Complete Illustrated
Instructions
³|₈" x 3" Lag Screw (52)
³|₈" Washer (79)
#8 x 1¹|₄" Deck
Screw (10)
³|₈" x 3" Lag Screw (52)
³|₈" Washer (79)
#8 x 1¹|₄" Deck
Screw (10)
³|₈" x 3" Lag Screw (52)
³|₈" Washer (79)
#8 x 1¹|₄" Deck
Screw (10)
CONTENTS TOOLS REQUIRED
HARDWARE INCLUDED (shown actual size)
3
/
8
" x 3" lag screw
3
/
8
" washer
Socket Wrench
⁹⁄₁₆" Socket
Adjustable Wrench
Ladder
Tape Measure
Safety Glasses
Drill
Square
Phillips Screwdriver
Saw
Hammer
1
/
8
" &
1
/
4
" Drill Bit
Pencil
Contoured Leisure
S
wing Kit Contains:
CUTTING GUIDE
2" x 4" x 8' – three (3) boards required
6 Seat Rails
Boards 1 - 3
48" 48"
BUILDING INSTRUCTIONS
1. Insert the six 2" x 4" x 4' seat rails into the
openings of one of the molded sides.
(Fig. 1)
2. Adjust seat rails so there is
a
1
/
2
" overhang on the
outside of the swing.
3. Repeat steps 1 and 2
for the other end.
Fig. 1
Detail
#6 x 1
1
/
4
"
deck screw
MEASURE, MARK AND IDENTIFY ALL LUMBER BEFORE CUTTING. (IF YOU DO NOT WISH TO MARK ON LUMBER, USE
MASKING TAPE OR CHALK.) CUT ALL LUMBER BEFORE BEGINNING CON STRUCTION.