Technical Specifications

Attach 60° half to the exit top using

⁵|₁₆" x ³|₄" hex bolts, ⁵|₁₆" washers and

⁵|₁₆" lock nuts as shown.

Finger tighten only at this time.

Attach one 60º Tunnel Assembly

to the Entrance Assembly using

⁵|₁₆" x ³|₄" hex bolts, ⁵|₁₆" washers

and ⁵|₁₆" lock nuts as shown.

Finger tighten only at this time.

Note: The long flange on the

60º Tunnel Assembly will

be rotated clockwise,

with three bolts between

the two long flanges.

Long Flange

Circular

Flange

Items for STEP 6:

(1) 60° half

(1) Exit Top

(7) ⁵|₁₆" x ³|₄" hex bolts

(14) ⁵|₁₆" washers

(7) ⁵|₁₆" lock nuts

Items for STEP 7:

(1) Entrance Assembly

(1) 60º Tunnel Assembly

(14) ⁵|₁₆" x ³|₄" hex bolts

(28) ⁵|₁₆" washers

(14) ⁵|₁₆" lock nuts

Note: If the circular flanges along the Entrance Assembly are not straight due to packaging or shipping,

place components in direct sun and or use a household hair dryer to soften flanges. Then bend

straight using your hands.

Assembly Tip: If lining up holes is difficult, loosen bolts on the long flange of each component to give

more clearance.

60º Exit Assembly