Technical Specifications

3
SPIRAL TUBE SLIDE ASSEMBLY
Position the side walls and floor as shown. (Fig. 1)
Note: The compression flanges of all three parts must
be facing up as shown.
Attach the side walls to the floor using ⁵|₁₆" x 1" hex bolts,
⁵|₁₆" washers and ⁵|₁₆" lock nuts as shown. (Fig. 1)
Tighten firmly with a ¹/₂" socket
and wrench but do not over
tighten.
Compression
Flanges
Attach the top bar to the side walls using
⁵|₁₆" x 1" hex bolts, ⁵|₁₆" washers and ⁵|₁₆" lock
nuts as shown.
Tighten firmly with a ¹/₂" socket and wrench
but do not over tighten.
Items for STEP 1:
(2) Side Walls
(1) Floor
(6) ⁵|₁₆" x 1" hex bolts
(12) ⁵|₁₆" washers
(6) ⁵|₁₆" lock nuts
Compression
Flanges
Items for STEP 2:
(1) Top Bar
(4) ⁵|₁₆" x 1" hex bolts
(8) ⁵|₁₆" washers
(4) ⁵|₁₆" lock nuts
Fig. 1
Before starting to assemble your Spiral Tube Slide, familiarize yourself with the contents.
Identify each component and hardware listed on Page 2. Hardware is shown actual size.
Crow’s Nest Assembly