Technical Specifications

11
2" x 4" x 24¹⁄₄"
2" x 4" x 24¹⁄₄"
On a flat work surface place the 2" x 4" x 24¹|₄"
boards to form an “L” as shown. Make sure the
ends are flush on both sides.
Drill an ¹|₈" hole at locations shown. Secure with
#8 x 2¹|₂" deck screws.
Items for STEP 14:
(2) 2" x 4" x 24¹|₄" boards
(4) #8 x 2¹|₂" deck screws
Items for STEP 13:
(10) ⁵|₁₆" x ³|₄" hex bolts
(20) ⁵|₁₆" washers
(10) ⁵|₁₆" lock nuts
Attach the sides using ⁵|₁₆" x ³|₄" hex
bolts, ⁵|₁₆" washers and ⁵|₁₆" lock nuts
as shown.
Tighten firmly but do not over tighten.