Technical Specifications
10
Items for STEP 12:
(8) ⁵|₁₆" x ³|₄" stove bolts
(8) ⁵|₁₆" washers
(8) ⁵|₁₆" lock nuts
Lift the assembly to the upright position
and insert the entrance end into the
Crow’s Nest Assembly.
This requires two adults.
Attach at top and bottom using ⁵|₁₆" x ³|₄"
stove bolts, ⁵|₁₆" washers and ⁵|₁₆" lock
nuts as shown.
Tighten firmly but do not over tighten.
Note: The pan head of the stove bolts
must be on the inside and lock nuts on
the outside as shown.
Note: Make sure the exit is resting
firmly in hole dug in previous step.










