Technical Specifications

12"
84"
72"
60"
24"
36"
48"
"12
"36
"24
"48
"60
"72
84"84
A-Frame Assembly
2" x 4" A-Frame Assemblies
Follow Pages 8-12
4" x 4" A-Frame Assemblies
Follow Pages 13-16
Items for STEP 1:
Extend A Bay Swing Beam
3 Post 5 Post
(6) or (10) 2" x 4" x 96" boards
(54) or (90) #8 x 2¹₂" deck screws
Stand Alone Swing Station
(8) 2" x 4" x 96" boards
(72) #8 x 2¹₂" deck screws
Assemble swing posts.
Place one drilled 2" x 4" x 96" board on top of a
non-drilled 2" x 4" x 96" board. Make sure boards
are flush with each other. If one board is longer
than the other, flush one end and let the other end
hang over. Secure with #8 x 2¹₂" deck screws.
Flush one
endend
Flush one
end
Flush one
Note: Quantities will vary depending on the
materials used to build the A-Frames.
Follow Pages 8-12 • Skip to Page 13 for 4'x4' Post A-Frame Assembly
Mark & Drill ¹/₈" holes at the locations
shown ³/₄" from the edge.
8
2 ' x 4 ' Laminated Post
STOP
Note: Repeat two or four
more times for the remaining
Extend-A-Bay swing post
assemblies. Repeat three times
for Stand Alone swing station kit.