Technical Specifications
21
94¹|₂"
25¹|₂"
2"
x 6"
x 120"
D
r
i
ll
Dri
ll
Items for STEP 1:
(1) A-Frame Assembly
(1) Single Leg Post Assembly
(1) 2" x 6" x 120" board
(4) #8 x 1¹⁄₄" deck screws
Lay out the A-Frame Assembly and Single Leg Post Assembly 94¹⁄₂" apart, elevated on 3" of scrap lumber.
Position one 2" x 6" x 120" board under brackets as shown. Making sure the assembly is square, hold
beam tight against bolts installed in A-Frame Assembly Step 2 and attach with #8 x 1¹₄" deck screws.
Use the brackets as a drill guide and drill ³₈" holes completely through the 2" x 6" x 120" board as shown.
Helpful Hint: If you are standing here
looking at the assembly, the A-Frame will
be on your right side, the single post will
be on your left side and the brackets will
be pointing the same direction.
90˚
Shown with 4" x 4"
Post A-Frame
Extend-A-Bay Assembly
Follow Pages 21-24
Right-Hand