Technical Specifications
17
94¹|₂"
25¹|₂"
2
"
x 6
"
x
12
0"
D
ri
ll
D
ri
ll
Items for STEP 1:
(1) A-Frame Assembly
(1) Single Leg Post Assembly
(1) 2" x 6" x 120" board
(4) #8 x 1¹⁄₄" deck screws
Lay out the A-Frame Assembly and Single Leg Post Assembly 94¹⁄₂" apart,
elevated on 3" of scrap lumber. Position one 2" x 6" x 120" board under brackets
as shown. Making sure the assembly is square, hold beam tight against bolts
installed in A-Frame Assembly Step 2 and attach with #8 x 1¹₄" deck screws.
Use the brackets as a drill guide and drill ³₈" holes
completely through the 2" x 6" x 120" board as shown.
90˚
Helpful Hint: If you are standing here looking at the assembly, the A-Frame will be on
your left side, the single post will be on your right side and the brackets will be pointing
the same direction.
Shown with
4" x 4" Post
A-Frame
30"
18"
18"
18"
12"
Items for STEP 2:
(1) 2" x 6" x 96" board
(8) #8 x 2¹⁄₂" deck screws
Position 2" x 6" x 96" board
directly on top of 2" x 6" x 120"
board as shown. Secure with
#8 x 2¹₂" deck screws at
dimensions shown.
2" x 6
" x 96
"
Shown with 4" x 4"
Post A-Frame
Extend-A-Bay Assembly
Follow Pages 17-20 • Skip to Page 21 for Right-Hand Assembly
Left-Hand