Technical Specifications

14
Mate one Right-hand Bracket Assembly to one
Left-hand Bracket Assembly to create an A-Frame
Assembly. Secure with ³₈" x ³₄" hex bolts and
l
ock nuts (do not use washers).
Repeat as necessary.
Note: These bolts are necessary to properly align
the 4"x4" Assembly to beam at a later step.
Items for STEP 3:
(2) ³₈" x ³₄" hex bolts
(2) ³₈" lock nuts
A-Frame Assembly
Place two ³₈" x ³₄" hex bolts and lock nuts through the
two lower holes of bracket on single 4" x 4" Assembly
(do not use washers).
Note: These bolts are necessary to properly align
the 4"x4" Assembly to beam at a later step.
Single Leg Post
- Skip this step for Free Standing Swing Station
Left-hand
Right-hand
N
ote: Quantities will vary depending on the
materials used to build the A-Frames.
Items for STEP 2:
1 A-Frame 2 A-Frames
(
2) or (4) ³₈" x ³₄" hex bolts
(2) or (4) ³₈" lock nuts