Technical Specifications

12
I
tems for STEP 6
:
Attach corner brackets. To complete the A-Frame Assembly, flip over as shown and position
brackets so that the short side is against the 2" x 4" x 60" board.
Use the bracket as a drill guide and drill ¹₈" holes 1" deep into the board. Attach with #8 x 1¹₄"
deck screws.
Again use the bracket as a drill guide and drill, on the lumber side, ³₈" holes completely through
the boards. Secure with ³₈" hex bolts, ³₈" washers (on the lumber side) and ³₈" lock nuts.
NOTE: If you are bolting through one
board,
use a ³₈" x 2" hex bolt.
If you are bolting through two
boards,
use a ³₈" x 3¹₂" hex bolt.
N
ote: Quantities will vary depending on the
materials used to build the A-Frames.
2" x 4" x 60"
1 A-Frame 2 A-Frame
(2) or (4) corner brackets
(8) or (16) #
8 x 1¹₄" screws
(2) or (4) ³₈" x 3¹₂" hex bolts
(2) or (4) ³₈" x 2" hex bolts
(
4) or (8)
³₈" washers
(4) or (8) ³₈" lock nuts