Technical Specifications

10
Left-hand
Right-hand
Items for STEP 3:
1
A-Frame
2
A-Frames
(2) or (4) ³₈" x ³₄" hex bolts
(2) or (4) ³₈" lock nuts
Mate the left-hand bracket assembly with the flipped bolt to
one right-hand bracket assembly as shown.
Secure with two ³₈" x ³₄" hex bolts and ³₈" lock nuts through
the two lower holes of brackets as shown
(do not use flat washers).
Flipped Bolt
Items for STEP 4:
(2) ³₈" x ³₄" hex bolts
(2) ³₈" lock nuts
Place two ³₈" x ³₄" hex bolts and ³₈" lock nuts through the two lower holes of bracket on single post as shown
(do not use flat washers).
Note: These bolts are necessary to properly align the single post assembly to beam at a later step.
Single Leg Post
- Skip this step for Free Standing Swing Station
Note: Quantities will vary depending on the
materials used to build the A-Frames.