AGES 3+ 06712 ™ Vortex Speedway ™ Thank you for choosing this awesome SPEEDSTARS playset! Includes 1 car body (#036), 1 chassis, 1 power winder, 1 car token, 1 track piece, 1 base, 2 top sections, 2 middle sections, 2 top connectors, 2 middle connectors, 1 door and 1 label sheet. CAUTION: Hair entanglement may result if child’s hair comes in contact with moving parts of toy. Adult supervision is required. Adult assembly required.
ASSEMBLY MIDDLE CONNECTORS MIDDLE SECTIONS 1. Fit middle sections together. 2. Snap 2 middle connectors onto middle sections as shown. DOOR KEY UPPER PIN LOWER PIN 3. Place door in base, fitting lower pin on door into hole in base. TOP CONNECTORS 5. BASE 4. Snap middle section assembly onto base, fitting upper pin on door into hole in middle section. 6. Snap top section assembly onto middle section assembly. TOP SECTIONS Fit 2 top sections together. Fit top connectors onto top sections.
PLAY FEATURES Enjoy super-fast ‘round ‘n ‘round racing fun with this awesome circular speedway! • Snap the car body onto the chassis. Place the car onto the power winder, hold the car in place and crank the handle until the car is fully wound (approximately 10-15 times). Place the car on the track, press the button and watch it zoom around the speedway! Note: For best performance, be sure the track piece is straight. • For glow-in-the-dark racing action: Hold the car up to a light for 15-30 seconds.
STORAGE • • • Remove track piece from ramp and slide it (on its side) into base until fully inserted. Store the power winder on side of base (posts on base into holes in power winder). Store the car in center of base. © 2003 Hasbro. All Rights Reserved. ® denotes Reg. U.S. Pat. & TM Office. 06712 P/N 6305980000 PLAYSKOOL.
