Craftspeople— ERT ERR IMPORTANT NOTICE! Please read through this instruction manual to familiarize yourself with all pairs and assembly steps.
IMPORTANT! READ THIS MANUAL ALL THE WAY THROUGH BEFORE BEGINNING TO FE RAINED PUT YOUR GAME TABLE TOGETHER! THEN a a READ EACH STEW BEFORE STARTING THAT STET AT LEAST TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS GAME TABLE Wrench Included with the Hardware Kit Phillips Screwdriver. Nol Included An electric screwdriver bie helpful in assembly.
PARTS IDENTIFIER (Not to Scale) 38"Bolt (16) H3: 3/8" Washer (16) a & H3: "Flat head screw 4) Ha: head screw (2) ACCESSORIES Soccer ball (4) AZ: Allen Wrench {1} AZ: TABLE COVER (1)
PARTS IDENTIFIER (Not to Scale) PZ: Left Leg (2) I P3: Right Leg (2) #1: Soccer Table(1) P4: Cross Bar Slide scorer(2) pe: Ball Entry Cup (2) PT: Ball Entry Socket (2) Smith 0 PE: Handle (8) end cap (8) PALE LEE Levels (4) Ch Player Rod (2) ©2: 3 Player Rod (4) 3:2 Player Rod Rubber bushing (16} C5: 5132"x1" Bolt (26) C6: Locking Nut (26) Home Men (13) C8: Away men {13} Co: Plastic washer (16)
1. Find a clean; level place to begin the assembly of your fops ball table, We recommend building the table on the box top to protect the parts during assembly. 2. Insert the cross bar (P4) to the legs (P3) as shown in figure 1 3. Malachite legs (P2) and (P3) with bolts (H1 and washers (H2). 4. Attach the leg levelers shown in figure 1.
/I\ WARNING: THIS STEP REQUIRES TWO OR MORE ADULTS. VERY CAREGIVER TURN THE TABLE OVER AND SET IT-ON HS LEGS: BE CA RERUN THE TAB EIS VERY HEAVY. Rotate the table to its upright position, being careful'to avoid using the legs for leverage and place the table'in its final location.
5:0 Rod assembly overview The completed rod assemblies R1,R2, R4. and R6, as shownin. Figure 3, are all be:on the same side of the table. The completed rod assemblies R3, R5.R7 and R8 archdeacon opposing side of the table as also shown in Figure. 3. One side will use players in'white. The other side will use players in black.
5.6 Once all rods earn place; secure the players (C7 and C8) lo the rods using baits (C5) and nits (C6). 6. Attach ball.entry caps (P68) and ball entry clip sockets (PT) to the side panels With screw (H4) 7. Attach the two sets of slide scorer (P5) tithe end of table with screw (H3), as shown in Figure 3.
BRS CARE AND USE OF YOUR TABLE Jesse soap and Walter and/or a spray furniture polish to clean all of the exterior surface. Do nol Use any acid or lye based cleaning products:as these can: interact with the metal surface . This product is intended for outdoorsy DO NOT sit, climb or lean on tillable, DOTSON drag the table'when moving it.
GAME RULE Table soccer 1 also called “Foosball” IL can be played by two teams of four players achiever by two individuals: The Object of the Game To be the dust team (or player) to sober 4d predetermined number of points giro store the most points in given amount of time. Serving The server rolls the ball through the serving hole to start the game, after pointillist scored, or after a ball leaves the table.
PRODUCT PARTS LIST Mode: #Extra Foosball Parts Description oy H1 Ja Root 16 Ha 3B Washer 6 HE 13M Flat head sower 4 Hd 2 Round head screw 2 Pl Soccer table 1 PZ Left leg Zz £3 Right leg 2 Pd Cross bar 2 FA Bligh starer 2 Pa Ball entry cup 2 RE Ball entry socket 2 Fa Handle 8 Py Hod DiCaprio i Pra Lag leveler 4 al Soccer ball 4 AZ Ton 1 AZ Table:cover 1 1 5 Player rod 2 oz 3 Slaver mod 4 3 2 Player rod 2 C4 Rubber bushiness 15 £5 53271" Boll 28 CB Licking nit 28 oF Home mien 13 j#:] Ai men 13 8 Plastic washe
