Operation Manual

For Windows® Users:

• Transferring the Pictures, Audio clips and Video clips to PC

1. Turn on the camera

2. Set the camera to Playback mode.

3. Connect the camera to a computer via the USB cable.

4. Double click on “My Computer” icon on your desktop and then you can see a “Removable Disk” drive.

5. Double click “Removable Disk” -> double click “DCIM”-> double click “100MEDIA”.

6. All the pictures, video clips and audio clips are in the “100MEDIA” folder. Highlight the pictures, video

clips or audio clips and drag them to a folder of your choice. You can also create sub-folders to group

them or use the Arcsoft software to edit and manage the pictures.

For Macintosh® Users:

MAC

• Transferring the Pictures, Audio clips and Video clips to Mac

NOTE:

For MAC user, directly plug-in the camera, no need to install the driver.

1. Turn on the camera

2. Set the camera to Playback mode.

3. Connect the camera with MAC via the USB cable, the systems will automatically recognize a MASS

STORAGE drive named “untitled”.

NOTE:

This Drive name will vary on different versions of MAC OS systems.

4. Double click the folder “untitled” to enter.

5. Double click the folder “DCIM” and then the folder “100MEDIA”.

6. You can copy the pictures, audio clips and video clips from this folder “100MEDIA” and paste them to the

hard disk.

8 Using the Camera as a Web Cam (PC only)

• Setting up NetMeeting™

NOTE:

Set the camera to Capture mode before starting NetMeeting™.

1. Turn on your camera.

2. Connect your camera to the USB cable on one end.

3. Connect the other end of the USB cable to a USB port on your PC.

4. Put your camera on top of your PC monitor or a flat surface.

5. Connect your speakers (not included) to your audio card’s line out jack.

6. If “MSDC“ shows on the camera LCD screen, press the Capture/Playback button to shift to “PC

Camera.“

• Start NetMeeting™

NOTE:

For Windows® XP / 2000 users who use NetMeeting™ for the rst time, Go to Start -> Run ->type in “conf” ->click “OK”

and then follow the on-screen set up instruction to set up NetMeeting™.

1. Double click the “NetMeeting” icon on the desktop or select the “NetMeeting” icon from the Windows®

Start Menu.

2. If you need further help on how to use Microsoft® NetMeeting™, select the “Help” under the menu bar

and choose the topic you need. You can also visit the website: http://www.microsoft.com/windows/

netmeeting.