Quick Start Guide

PTUBAS21

UMBRELLA BRACKET

WITH ADJUSTABLE SHOE

QUICK SETUP GUIDE

Before using your new product, please read these instructions to prevent any damage.

PACKAGE CONTENTS

• Umbrella bracket with ash mount

• Dual-threaded 1/4" and 3/8" stud

• Quick Setup Guide

FEATURES

• Tilt and swivel action adjusts to your lighting

needs

• Adjustable locking clamp ts most shoe-mount

ashes

• Umbrella receptacle with locking knob holds

equipment securely

• Durable metal construction for a rm hold

• Reversible 1/4" and 3/8" threaded female stud

adapter for tripod or light stand attachment

PRODUCT OVERVIEW USING THE UMBRELLA BRACKET

WITH FLASH MOUNT

1 Loosen the locking screw.

# ITEM

1 Cold shoe ash

mount

2 Screw lock

3 Umbrella socket

4 Locking screw

5 Thumb screw lock

6 Tension screw

7 Stud adapter

DESCRIPTION

To mount a ash on the bracket.

Tighten to secure the umbrella shaft to the

bracket.

Hole for an umbrella shaft.

Tighten to secure the bracket to the tripod

or stand.

Tighten to secure a ash to the bracket.

Loosen to tilt the bracket. Tighten to secure

in place.

For 3/8" and 1/4-20" thread mounting on

a tripod or stand.

Locking screw

PAGE 1
FEATURES PRODUCT OVERVIEW # ITEM DESCRIPTION 1 Cold shoe flash mount To mount a flash on the bracket. 2 Screw lock Tighten to secure the umbrella shaft to the bracket. 3 Umbrella socket Hole for an umbrella shaft. 4 Locking screw Tighten to secure the bracket to the tripod or stand. PT-UBAS21 5 Thumb screw lock Tighten to secure a flash to the bracket. UMBRELLA BRACKET WITH ADJUSTABLE SHOE 6 Tension screw Loosen to tilt the bracket. Tighten to secure in place.
PAGE 2
Install the bracket on the top of a light stand. OR Install the adapter on a tripod or stand, then install the bracket on the adapter as shown (required on most stands or tripods). 3 Tighten the locking screw to secure the bracket. 4 Place a photo flash in the cold shoe flash mount on the top of the bracket. Tighten the thumb screw lock to secure it. 5 Insert the base of an umbrella into the umbrella socket, then tighten the screw lock to secure it. Point the flash at the center of the umbrella.