Quick Start Guide
www.platinumtools.com
7
Network / PoE Detection
• Power on the Net Prowler.
• Connect the Net Prowler to a switch
or active network jack.
• Use the left or right arrow buttons to
select the Network/PoE icon
and press the enter button or
press the Network/PoE
soft key
.
• The Net Prowler will automatically detect and display link capability, connection
speed, PoE class, and PoE Min/Max voltages.
• To perform a Network Test only, press the PoE soft key .
• To save the PoE data, press the Save soft key .
• Use the arrow buttons and the enter button to name the PoE file.
• Press the Save soft key to save the PoE file.
Link Light
• Power on the Net Prowler.
• Connect the Net Prowler to an
active network cable or port.
• Press the Network/PoE soft key
then press the Link Light
soft key
.
• The Link Light will automatically begin
upon entering the Link Blink menu.
• The Link LED above the LCD screen will flash at the same cadence as
the port light.
• Use the up and down arrows to adjust the transmit frequency to suit
the switch characteristics