Spec Sheet

California, USA
Phone: [phone] • Fax: [phone]
www.platinumtools.com
We Make Connections EZ!
™
2017© Platinum Tools, Inc. All rights reserved. ToneMaster – ToneSeeker 7/17 JB
ToneSeeker
™
Tone Tracer Probe
Features:
• Comfortable ergonomic shape, balanced weight
• Volume control
• Recessed “on” switch
• Tip replacement without opening case
• Battery-low indicator
• Slender prole to t in any tool pouch
• Lanyard attachment point
ToneMaster
™
| ToneSeeker
™
Specications:
Tone Sensitivity Input Impedance:
10MΩ (to internal ground, inaccessible
outside the case)
Probe Tip Resistance (min):
10KΩ/square (bulk resistance)
Frequency Range:
340 Hz – 1.6K Hz
Electrical Battery Life: Time is for the full capacity of the battery
used continuously (one 9 V alkaline, 540
mA-hr, not included):
15 hrs, typical
Ordering Information:
Description Part # UPC Code
ToneSeeker Tracer Probe TP250C 849160008965
ToneMaster High-Powered
Tone Generator with
Alligator Clips
TG210C 849160008941
ToneMaster High-Powered
Tone Generator with ABN
Clips
TG220C 849160008958
Professional Tone and
Probe Kit, Alligator Clips
with Belt Pouch
TG210K1 849160008972
Professional Tone and
Probe Kit, ABN Clips with
Belt Pouch
TG220K1 849160008989
ToneMaster
™
High Power Tone Generator
Features:
• 700% more power than standard tone generators
• Unbalanced tone mode supports longer distances on UTP cables
• Constant amplitude output ensures no signal decrease as battery
discharges
• Auto-off for battery conservation
• Full talk battery to power a dry line
• Tone may be added in any mode – phone sets without a monitor
feature can pick up tone
• Models available with molded-in alligator clips or molded-in angled
bed-of-nails (ABN) clips
TG220C
Specications:
Tone Frequencies: Dual 1,165 Hz and 874 Hz
Two single tones 1,165 Hz and 874 Hz
Tone Power: Typical (into 600Ω, new battery to 5.0 V)
LO 3.6 dBm
HI 9.3 dBm
High Power Mode
LO 12.3 dBm
HI 18.4 dBm
Voltage Protection: Status – DC 60 V, continuous
AC 300 V peak, 2 secs
Continuity (into 600Ω) – DC 52 V
Tone Mode: 250 DC or peak AC volts
Electrical Battery Life Time is for the full capacity of the battery
used continuously (one 9 V Alkaline, 540
mA-hr, not included):
120 hrs, typical
Professional Tone and Probe Kits
Part # Contents
TG210K1 ToneMaster with Alligator Clips
ToneSeeker
No-Fault, RJ12 Cable
Tone and Probe Belt Pouch
TG220K1 ToneMaster with ABN Clips
ToneSeeker
No-Fault, RJ12 Cable
Tone and Probe Belt Pouch
TP250C