Quick Start Guide

6
Cable Prowler Quick Start Guide
• Power on the Cable Prowler.
• Use the left or right arrow buttons to select the tone generator icon
and press the enter button.
• The cable prowler will automatically activate the tone generator upon
entering the tone generator menu.
• Connect your cable to either the RJ45 jack or coax connector located on the
top of the Cable Prowler.
• To switch between network and coax cables, press the coax cable/RJ45
soft key / .
• Press the up or down arrow buttons to select tone cadences 1 thru 4.
• Press the left or right arrow buttons to select which pin or pair to place the
tone.
• Use a tone probe alongside the cable or at the end of the cable to hear an
audible tone.
Tone Generator