Quick Start Guide

www.platinumtools.com

• Power on the Cable Prowler.

• Connect the Cable Prowler to a switch or active network jack.

• Use the left or right arrow buttons to select the Network/PoE icon

and press the enter button or press the Network/PoE soft key.

• The Cable Prowler will automatically detect and display link capability,

connection speed, PoE class, and PoE Min/Max voltages.

• To perform a Network Test only, press the PoE soft key.

• To save the PoE data, press the Save soft key.

» Use the arrow buttons and the enter button to name the PoE le.

» Press the Save soft key to save the PoE le.

Network / PoE Detection

• Power on the Cable Prowler.

• Connect the Cable Prowler to an active Network cable or port.

• Press the Network/PoE soft key then press the Link Light soft key.

• The Link Light will automatically begin upon entering the Link Blink menu.

• The Link LED above the LCD screen will ash at the same cadence as the port

light.

• Use the up and down arrows to adjust the transmit frequency to suit the switch

characteristics.

Link Light