Spec Sheet

Tele-TitanXg Crimp Tool

P/N 90170

10-Gig Shielded Connector

P/N 106190

Streaming media demands robust,

dependable networks, including 10-Gig

Cat6A shielded cable, to provide the

necessary expanded bandwidth. However,

these larger, shielded cables require special

connectors and tools.

Our 10-Gig shielded connector and

Tele-TitanXg crimp tool are specically de-

signed to terminate Cat6A cables. A pairing

that assures you will achieve 10-Gig perfor-

mance... a true 10Gig Termination System.

See Kit

Inside

RJ45 Cat6A/10-Gig shielded connector:

• Max cable OD: 8.5mm/0.335"

• Max conductor OD: 1.35mm/0.053"

• Meets 10-Gig performance standard

• UL and RoHS compliant

Tele-TitanXg CriÜ Tool:

• Specically made for terminating, P/N 106190

• Straight action vertical crimp force

• Minimal hand force for a perfect crimp

Application:

• Cat6E • 10-Gig Cat6A

• Cat7

Tele-TitanXg Crimp Tool

P/N 12515C

RJ45

Cat6A/10-Gig

shielded connector

P/N 106190

For terminating

Cat6E, Cat6A, Cat7

and larger industrial

Ethernet cables.

10Gig Termination System

PAGE 1
0Gig Termination System Streaming media demands robust, For terminating Cat6E, Cat6A, Cat7 and larger industrial Ethernet cables. dependable networks, including 10-Gig Cat6A shielded cable, to provide the necessary expanded bandwidth. However, these larger, shielded cables require special connectors and tools. Our 10-Gig shielded connector and Tele-TitanXg crimp tool are specifically designed to terminate Cat6A cables. A pairing that assures you will achieve 10-Gig performance...
PAGE 2
10Gig Termination Kit... meets 10-Gig performance standard.
PAGE 3
Instructions 1 T568A / T568B Wiring Chart Strip & remove 1" of your cable jacket with the Cyclops® 2 Cable Stripper (P/N 15010C). Remove cellophane and shield. Straighten the wires. 6 Use the chart above to determine whether you will be using the T568A or T568B configuration and organize wires accordingly. 2 Line up your wires and make a clean cut across all 8 conductors and slide on the wire guide bar.