Tech Drawing
3. After removal of the front plate, remove the blade. Note the orientation of the blade. Once the
blade has been removed, note the small spacer under the blade. This piece does not need to
be removed to replace the blade. Although note that this piece has a specic orientation. The
space from the screw hole is smaller on top than on the bottom.
4. Place the new blade into tool ensuring the spacer is oriented correctly, the at side of the
blade is face down, and the angled side is showing.
5. Orient the front plate with the at side against the blade and all holes lining up. Insert screw
and slightly tighten the screw with the screwdriver. The blade should still be loose.