User's Manual

Compatibility
• Mobile phones*
• Smart phones*
• PDAs*
• PC / Laptops
• Game consoles
• MP3/MP4 players
*Compatible with all Bluetooth devices supporting the A2DP profile.
The 3.5mm jack (included) provides instant audio connectivity for any non-Bluetooth devices such as PC/Mac/
Laptops, Game consoles or MP3/MP4 players.
1. Powering your Aura Blu Note™
Before you can pair your Aura BluNote™ to a Bluetooth® device, you must power it either by plugging in the AC
power adapter or by using the 4 AA batteries. To install the batteries, open the battery compartment located on the
base of the Aura BluNote™ speaker, insert the batteries as shown on the inside of the battery cover.
Please Note: Rechargeable batteries will not be charged through the use of the power adapter.
2. Powering On/Off
•Powering On: Press the Power button until the LED lights up and three tones can be heard. Release the Power button. The blue
LED will flash every few seconds to indicate your Aura BluNote™ is on.
•Powering Off: Press the Power button until the front LEDs turns off.
3. What is “Pairing”
Pairing is the process of two Bluetooth® compatible devices linking or communicating with one another. A mobile phone identifies
a Bluetooth® device and uses a password or PIN to establish the pairing. This process allows only a verified device to connect to
your mobile phone, ensuring security.
4. Pairing the Aura Blu Note™ with a Bluetooth® enabled Mobile Phone or other device
VERY IMPORTANT: When pairing the Aura BluNote™ to a Bluetooth® device, you must pair as "speaker" or "wireless speaker". Do
not pair as headset or earphone, as this will affect the sound quality. Your device may list different pairing options: choose the
one that most closely fits "speaker". If you need assistance with pairing, please call Spracht Customer Service at 1-888-350-0132.
User Guide
User Guide
6 7