User's Manual

‐ To Toggle in between 3
rd
Party/Original call: Double Press “Stand-by or Phone” key at the side
‐ To Redial Last Calling number: Double Press “Stand-by or Phone” key at the side
Remark: PF302 could perform as a speaker phone, ONLY HFP/HSP is available in your BT mobile,
Battery Recharge & Firmware Upgrade Instruction:
‐ PF302 could be recharged in any status by USB power (thru the provided USB cable from PC; or from
USB adaptor “Not included”)
‐ PF302 firmware upgrade is available thru USB cable from PC
LED indicator (on the Speaker):
‐ LED Off – Power OFF
‐ BLUE LED ON – Power ON
‐ Flashing of BLUE/RED LED – Pairing mode
‐ RED LED ON – Low Battery Level
‐ Flashing of RED LED – Almost No Power
‐ Flashing of BLUE LED – Battery is Recharging
Remark: No LED indication if Main Power Switch-off at the back
Specification:
‐ Total 6W output (3W / Channel)
‐ Full-range (35mm) driver / Channel + Passive Radiator
‐ Distortion <= 10 %
‐ S/N ratio:>75dB@1W
‐ Frequency Response: 200Hz – 15k Hz
‐ Li—polymer Batt: 1150mAh
‐ Playtime: 5hours in 80% Volume
‐ Recharging Time: 3hours
‐ (Optional) Power Adaptor: 5VDC @ 500mA
Compatibility (Bluetooth device)
‐ BT 2.0 or above device with A2DP/AVRCP/ HFP/ HSP
Trouble Shooting:
Sound not Clear or no sound
‐ Please check PF302 or BT device Volume
Level
Playing Music Not Transfer from BT device to
PF302
‐ Make sure your BT device has A2DP
‐ Check if both devices are connected
‐ Restart PF302 for auto-connecting with your