User's Manual

General Speaker Setup & Pairing:
‐ Select a BT 2.0 or above device (mobile phone or music player) for pairing.
‐ Turn on the Main Power Switch of PF302 at the back.
Remark: Make sure your PF302 has been fully charged.
‐ Activate your BT device to the searching mode (new device searching).
‐ Press and hold “Stand-by or Phone & Phone” key at the side of PF302 till the flashing of BLUE/RED
LED, PF302 will have 3mins (searchable time) for your BT device to pair with.
‐ <<Plastoform PF302>> will be displayed in your BT device. Please select it for pairing. “0000” is the
pairing code if necessary.
‐ PF302 will stop flashing & with a sound effect to specify it is paired with the BT device.
Remark: Pairing steps are for 1
st
time connection, simple steps could be done by either PF302 or your
BT device in future use.
‐ Double check with your BT device to see PF302 is connected.
Remark: PF302 will also stop flashing with another sound effect to specify pairing failure after the
3mins. Repeat from the activation of your BT device to try again the pairing with PF302.
Connection & Operation (Music) Instruction:
‐ Turn on the Main Power Switch of PF302 at the back.
‐ To Power up the unit: Press “Stand-by or Phone” key at the side of PF302 till BLUE LED is on
Remark: Make sure PF302 has been fully charged & the Main Power Switch is on
‐ Turn on your BT device and select the connection w/ <<Plastoform PF302>>
‐ Play & Pause Music: Press “Stand-by or Phone” key at the side
‐ To play Next song: Press “>>|” key at the side
‐ To play Previous song: Press “|<<” key at the side
‐ To Fast Forward: Press & hold “>>|” key at the side
‐ To Rewind: Press & hold “|<<” key at the side
‐ To adjust the Volume: Adjust the volume level either in PF302 or your BT device
‐ To Power down the unit: Press the Stand-by or Phone key at the side of PF302 till BLUE LED is off
Remark: If HFP/HSP is available in your BT mobile ONLY (No A2DP), such as iPhone 2G, PF302
could perform as a speaker phone.
Operation (Speaker Phone) Instruction:
‐ To Answer a call: Press Any Key at the side
‐ To Reject a call: Press & hold “Stand-by or Phone” key at the side
‐ To Hang-up a call: Press “Stand-by or Phone” key at the side
‐ To Switch the call in between PF302 & mobile: Press & hold “Stand-by or Phone” key at the side
‐ To Answer Call Waiting (3
rd
Party): Double Press “Stand-by or Phone” key at the side