User's Manual

10 11
USING AUX IN
Connect your audio device to the speaker with a 3.5mm-to-3.5mm cable (not
included).
1. Plug one end of the cable into your audio device, just like you would a pair of
headphones.
2. Plug the other end of the cable into the 3.5mm port labeled AUX IN on the Big
Blue Studio.
3. Use your audio device to control music playback and volume through Big Blue
Studio.
Note: The AUX IN function takes precedence over the Bluetooth
®
connection.
USING AUX OUT
Connect other equipment or speakers by using audio cords with mini jacks (not
included) to the AUX OUT PORT.
Note: AUX OUT can only be used when a device is paired with Big Blue
Studio via Bluetooth
®
.
BLUETOOTH DEVICE SETTINGS
Many Bluetooth Streaming Devices have their own EQ sound settings. To optimize
your Big Blue Studio listening experience, adjust the EQ settings on your Bluetooth
Streaming Device. Consult your device’s user manual.
ADJUSTING BASS
1. Press the MODE button until the BASS MODE LED INDICATOR illuminates.
2. Press the + button to increase the Bass.
3. Press the — button to decrease the Bass.
4. The BASS LEVEL INDICATOR LEDs will indicate that the Bass level is
adjusting.
ADJUSTING TREBLE
1. Press the MODE button until the TREBLE MODE LED INDICATOR illuminates.
2. Press the + button to increase the Treble.
3. Press the — button to decrease the Treble.
4. The TREBLE LEVEL INDICATOR LEDs will indicate that the Treble level is
adjusting.
8316218 Big_Blue_Studio_BT Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk