User's Manual

8 9
PAIRING YOUR DEVICE WITH NFC
1. Enable your device for NFC pairing. Refer to your device’s owners manual for
details if necessary.
2. Touch your device to Big Blue Studio's NFC SENSOR. Confirm the connection
on your device.
USING BIG BLUE STUDIO AFTER PAIRING
1. Press the POWER/PAIRING button to turn on the Big Blue Studio until the
LED RING illuminates solid and a tone sounds.
2. Big Blue Studio should automatically remember your device. Depending upon
your device, you may have to select “Big Blue Studio BT” in your device’s menu.
3. To turn Big Blue Studio off, press the POWER/PAIRING button.
Note: When Big Blue Studio is powered on, pressing any button will
activate the function LEDs and LED RING for 5 seconds. After 5 seconds has
passed, the function LEDs turn off and the LED RING remains on at a low
brightness level.
ADJUSTING VOLUME
The default mode is Volume. If the Big Blue Studio is in Treble or Bass mode, press
the MODE button until the VOLUME MODE LED INDICATOR illuminates.
1. Press the + button to increase the Volume.
2. Press the — button to decrease the Volume.
3. The VOLUME LEVEL INDICATOR LEDs will indicate that the Volume level is
adjusting.
SET-UP
1. Connect the AC ADAPTER’S jack to the DC IN POWER PORT on the back of
Big Blue Studio.
2. Plug the AC ADAPTER into an electrical outlet.
PAIRING YOUR DEVICE
1. Prepare your device to pair using Bluetooth
®
, making sure you are within
33 feet of Big Blue Studio. Refer to your device’s owner’s manual for details if
necessary.
2. Press the POWER/PAIRING button on the main unit to turn on the Big Blue
Studio until the LED RING illuminates solid and a tone sounds.
3. Press and hold the Power/Pairing button on the main unit until the LED
RING starts pulsing.
4. The Big Blue Studio is in pairing mode when the LED RING is pulsing. Big
Blue Studio will wait for a connection in pairing mode for up to 120 seconds.
5. Once Big Blue Studio is in pairing mode and your device is ready to pair, select
“Big Blue Studio BT.” If prompted, use 0000 as a PIN for the pairing code.
6. Once “Big Blue Studio BT” is selected, the LED RING will change to solid blue
and a tone will sound to confirm pairing is complete.
Note: To cancel the pairing mode press the POWER/PAIRING button to
power the unit off, or wait the 120 seconds for Big Blue Studio to cancel
pairing automatically. The LED RING will return to solid blue, and the unit will
remain on.
8316218 Big_Blue_Studio_BT Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk